Micro-Boost Kit
The kit comprises the Micro-Boost PCB fully built and tested, a 3PDT switch for on/off and bypass control, a battery holder and with battery included, an LED, some bits of wire and an o ring to adapt the switch to a standard scratch plate potentiometer hole
A recommended wiring schematic is provided
You can, of course, conjure up your own wiring. For example, mount the LED remotely and wire back to the board
You could also substitute a PP3 9V battery with a conventional clip if you have space. We give you the much smaller A10 9V battery and holder because it’s easier to find space for, and the board is so low powered that lifetime is good.
The kit comprises the Micro-Boost PCB fully built and tested, a 3PDT switch for on/off and bypass control, a battery holder and with battery included, an LED, some bits of wire and an o ring to adapt the switch to a standard scratch plate potentiometer hole
A recommended wiring schematic is provided
You can, of course, conjure up your own wiring. For example, mount the LED remotely and wire back to the board
You could also substitute a PP3 9V battery with a conventional clip if you have space. We give you the much smaller A10 9V battery and holder because it’s easier to find space for, and the board is so low powered that lifetime is good.
The kit comprises the Micro-Boost PCB fully built and tested, a 3PDT switch for on/off and bypass control, a battery holder and with battery included, an LED, some bits of wire and an o ring to adapt the switch to a standard scratch plate potentiometer hole
A recommended wiring schematic is provided
You can, of course, conjure up your own wiring. For example, mount the LED remotely and wire back to the board
You could also substitute a PP3 9V battery with a conventional clip if you have space. We give you the much smaller A10 9V battery and holder because it’s easier to find space for, and the board is so low powered that lifetime is good.